Spec sheet + Measurements

Carhartt® ANSI 107 Class 3 Storm Defender® Jacket. CT106693

Product photo
Sketches

front

back

Get the job done in wet weather while staying seen in this waterproof jacket that meets ANSI/ISEA 107 Class 3 standards.

  • 5.25-ounce, 100% polyester three-layer twill
  • Meets ANSI 107 Class 3, Type R visibility standards
  • Reflective material segmented for breathability
  • Storm Defender® waterproof, breathable technology
  • Fully-taped waterproof seams
  • Attached, adjustable hood
  • Full-length waterproof zipper and storm flap
  • Adjustable hook and loop cuffs
  • Two secure lower zippered pockets
  • Two interior drop-in pockets with hook and loop closures
  • Carhartt label sewn on bottom left pocket
  • Drop tail hem
  • Reflective material maintains performance through 75 home launderings
  • This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

CARE INSTRUCTIONS
Close All Zippers. Machine Wash Cold Like Colors. Do Not Bleach. Tumble Dry Low. Do Not Use Fabric Softeners. Do Not Starch. Do Not Iron. Do Not Dry Clean. High-Visibility Reflective Material. Maximum 75 wash cycles.

Product Measurements

S M L XL 2XL 3XL 4XL
Body Length at Back 28 7/8 30 30 1/8 31 1/4 31 3/8 32 1/2 32 5/8
Chest 23 25 27 29 31 33 35
Sleeve Length from Center Back 35 7/8 36 1/2 37 1/8 37 3/4 38 3/8 38 7/8 39 3/8
  • Body Length at Back: Measured from high point shoulder to finished hem at back.
  • Chest: Measured across the chest one inch below armhole when laid flat.
  • Sleeve Length from Center Back: Measure from Center Back neck to shoulder point to sleeve hem.

Size Chart

Size S M L XL 2XL 3XL 4XL 5XL 6XL
Chest 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64 66-68

How To Measure

CHEST

Measure under the arm and around the fullest part of the chest with arms down, keeping tape horizontal.

Colors

Please note: PMS code information is shown only when an exact match is available.
Brite Lime

Brite Lime