Spec sheet + Measurements

Red Kap® Long Size, Short Sleeve Striped Industrial Work Shirt. CS20LONG

Product photo
Sketches

front

back

This hardworking IL50 style has a professional stripe and is tested through 50 industrial launderer washes.

  • 4.25-ounce, 65/35 poly/cotton with Touchtex™ technology which provides breathable comfort lasting colors and stain resistance
  • Requires minimal ironing thanks to a wrinkle-resistant finish
  • Open collar with sewn-in stays
  • Separate two-piece yoke
  • 7 buttons including button at neck
  • Two button-through pockets
  • Bartacked pencil stall on left pocket
  • Industrial laundry friendly

 

 


CARE INSTRUCTIONS
Machine wash, tumble dry.

Product Measurements

ML LL XLL 2XLL 3XLL
Chest Width 23 25 27 29 30 1/2
Sleeve Length from Center Back 20 1/4 21 1/4 22 1/4 23 23 3/4
Neck 15 1/2 16 1/2 17 1/2 18 1/2 19 1/2
Body Length at Back 36 1/2 36 3/4 37 37 1/4 37 1/2
Pocket Width 5 5 5 5 5
Pocket Height 5 3/8 5 3/8 5 3/8 5 3/8 5 3/8
  • Chest Width: Measured across the chest one inch below armhole when laid flat.
  • Sleeve Length from Center Back: Measure from Center Back neck to shoulder point to sleeve hem.
  • Neck: Measured from center of button to center of buttonhole.
  • Body Length at Back: Measured from high point shoulder to finished hem at back.
  • Pocket Width: Measure from side to side at top edge.
  • Pocket Height: Measure from top to bottom at center.

Size Chart

Size ML LL XLL 2XLL 3XLL
Chest 38 1/2 -42 42 1/2 - 46 46 1/2 - 50 50 1/2 - 53 53 1/2 - 56
Neck 14 5/8 - 15 1/2 15 5/8 - 16 1/2 16 5/8 - 17 1/2 17 5/8 - 18 1/2 18 5/8 - 19 1/2

How To Measure

Neck

Measure around the fullest part of the neck at the base.

 

Chest Width

Measure under the arm and around the fullest part of the chest with arms down, keeping tape horizontal.

 

Arm

Place hand on hip. Start at the center of the back of the neck and measure across the shoulder, to the elbow, and then down to the wrist.